There are a lot of ways that plumbing can go wrong. But sometimes, if enough things are going wrong and the problems are persistent, it could be a sign that you need to repipe your home completely. Of course, this is a huge project, and you don’t want to go into it without knowing some of the most important facts regarding repiping your home. So, how do you know if your water leak in Sacramento is bad enough that you need to repipe? And what can you expect from such a project? Keep reading to find out.
Signs You Need Repiping
Obviously, you don’t want to call for repipe specialists in Sacramento if a simple repair will do the trick. But how do you know if you need to replace your pipes completely? Here are a few key signs:
- You experience non-stop plumbing problems. The occasional clogged pipe or leaky faucet isn’t anything to get your feathers ruffled over. But if you’re constantly paying for plumbing work and repairs, there’s likely a much bigger problem that can be fixed with new pipes.
- Your house has lead pipes. If your home was built in the 1920s or earlier, it might have been built with lead pipes. These present some serious health issues, so even if they’re functioning just fine, you should have them all replaced.
- Your house has galvanized steel pipes. While these pipes don’t present the same health concerns as lead pipes, they can rust. So, if you have an older home, have those pipes inspected for signs of corrosion, and if you spot any, have your home repiped.
- You’re considering a remodel. If you’re renovating a portion of your home with plumbing—like the bathroom or kitchen, you should have the plumbing inspected and consider repiping if the pipes are aged at all. It’s better to get it all done at once than have to open up the walls again later.
How Does It Work?
As we said, repiping a house is a major undertaking, and it will likely be one of the biggest renovation projects you have ever done in your home. The first step is to have a professional examine the issue and provide an estimate on the project. They should let you know if you need to repipe your whole house or just a single section of your home. Next, you and your installers will select the materials and secure work permits if needed.
Water service will need to be shut off to your home while work is being done, but the plumber will often turn it back on for you at night, so your evening routines aren’t impacted if you choose to stay in the home at this time. They’ll pinpoint the locations of the pipes and cut them into your drywall to access those pipes and disconnect them. You can choose to either keep the old ones inside the walls or have them pulled out. They’ll then install the new ones and patch up and repaint the wall for you.
Time and Cost
The exact amount of time your project will take and its cost will vary widely depending on several factors. These factors include the following:
- The number of feet of piping being replaced
- Which type of pipe you choose for the new piping
- Whether or not you have the old pipes completely removed
- Building permit costs, if needed.
If you want to get an estimate on the time and cost of your repiping project, contact Bullseye Leak Detection. We provide the best plumbing in Sacramento with superior professional service. Give us a call for a free estimate today!