central valley
sewer & utility
video inspections
If your sewer line is giving you trouble, a thorough video inspection can provide you with the exact cause and location of your sewer blockage or leak.
The trained technicians at Bullseye Leak Detection use sophisticated cameras and technology to capture clear, detailed images of your sewer line’s interior. It can help us to determine whether you have a block in your line, root intrusion, bellying of the pipe, a line break, or another issue, as well as identify the exact location of the trouble.
A detailed visual inspection is the first step to getting your sewer line back in proper order. Our equipment will also accurately map out and measure the length and depth of the pipe, making it easier to provide the necessary repairs or replace your line if needed. Contact Bullseye Leak Detection in Stockton today to schedule a sewer video inspection by Stockton’s leading plumbing company.
Sewer Line Leak Locating
Bullseye employs a unique, proprietary method for detecting broken sewer lines beneath buildings, particularly those with slab floors.
Traditional video inspections only show the inside of intact pipes. If a sewer pipe has separated or broken without obstructing flow—meaning sewage is leaking out—it could be due to a failed glue joint, an improperly installed connection, or an offset that makes part of the pipe inaccessible.
In these specific cases, our technician will divide the system into smaller sections and perform hydrostatic tests on each one. This allows us to pinpoint not only which section of the sewer line is leaking but also the exact location of the break beneath the slab. Our Vivax line locator, used alongside a sewer sonde or camera, provides precise depth and location information. If a clean-out is inaccessible or missing, we may need to open walls and cut riser pipes to access each section of the sewer line.
Sewer Smoke Test
If you are experiencing sewer smells or strong odors in a bathroom or specific area of your house or building, it may indicate a broken vent line or a dry trap in the system.
Sewer systems are designed to drain waste away and require proper venting, typically exhausted to the roof.
These vent lines are located within the walls or attic. If one of these lines is broken or separated, sewer gas can escape and cause unpleasant odors. Our team can identify such issues by conducting a smoke test. We seal off the sewer clean-out at one end and then pump smoke into the system from the roof. The smoke or thermal images reveal the location of the leak. In some cases, the technician may need to cut open walls or access ceilings to reach the leak source. In other situations, such as a toilet wax seal leak or a leak in a commercial kitchen floor sink, the problem may be more accessible. Once we identify the leak, we can help you make the necessary repairs.
book your plumbing specialist today
Call (209) 457-5325 or click to schedule service.
utility locations
At Bullseye Leak Detection, we use advanced utility detection and mapping techniques to ensure that we never damage any buried utility lines when damaging a pipe.
In addition to mapping out your utilities before we excavate any pipes on your property, we can also provide utility mapping services in Stockton, CA, for our customers.
Whether you’re building an in-ground pool or adding an extension onto your home, it’s vital to know the exact location of any buried electrical lines, sewer pipes, storm drains and even abandoned septic systems. Our ground-penetrating radar can detect lines and structures up to 20 feet beneath the ground, giving you a clear picture of the underground layout of your property.
No amount of guesswork can provide the level of reassurance that a professional utility location provides. Contact us today for utility mapping services in Central Valley.
